Our Services

INDEKS

Technical Base

Land and property complex

№	Denomination/description	Photography
1	Office building Moscow, Malaya Cemenovskaya str., 16 (4 floors, total area 1520,4m2)
2	Parking (occupancy - 80 parking slots)
3	Laboratory complex Moscow, Malaya Cemenovskaya str., 16, bld. 1 (total area 204 m2)
4	Warehouses Moscow, 5th Sokolina gora str., 25, bld.4 (total area m2) Moscow, Stromynka str., 11 (total area 249,4 m2)

New acquisitions

№	Designation of device (equipment)	Purpose of device (equipment)	Photography
1	The V-Line 3D Terrestrial Laser Scanner RIEGL VZ-1000	It is used for reception of the high-precision cartographical data on large objects at performance of works in mine surveying, geodesies, building, architecture and other branches.
2	Georadar "Loza"	It is applied at the decision of following problems: Engineering-geological researches at designing of linear and vulgar constructions; Control of a condition of a ground in a zone of engineering constructions at building and operation (the bases of buildings, iron and highways); Revealings of underground metal and nonmetallic communications; Search in a ground and in building designs of cavities of an artificial and natural origin (karstic cavities, emptiness and tectonic infringements); Definitions of capacity bulk and deformed грунтов, картирования borders of radical breeds under friable adjournment; Search peschano-gravijnyh adjournment; Definitions of a condition of bridges, support, tunnels; Detection of a burial place of an ecologically harmful waste; the latent tranches, borders of the polluted soils, places of leakings.
3	FIAT Ducato (1)
4	ВАЗ-2131 (LADA 4x4) (1)
5	Citroen Berlingo (1)
6	Citroen Berlingo (2)
7	Citroen Berlingo (2)
8	Set"EkoAkustika-110A"	Used to measure noise and infrasound. This prof. device that can be used in many industries: Hygienic evaluation of noise in the workplace (AWP and production control). Hygienic evaluation of public noise, short-and medium-term noise monitoring. Overall vibration (vibration sensor optional). Measurements of noise characteristics of machines and equipment (sound pressure and sound power) Product certification. Measurements of sound insulation. Evaluation of speech intelligibility, the protection of information.
9	The key limiting torque QLE2100N 500-2100 Hm	Torque wrenches with intermediaries with small tightening force is usually used to manufacture the assembly or repair of equipment, as well as in construction to work with anchor bolts. Torque wrenches with great effort, (model QLE750N-S - QLE2100N-S), generally used in construction, assembly of steel structures for tightening bolts.
10	Analyzer photoionic KOLION-1B	Portable photoionization gas analyzer KOLION-1B (1B KOLION) Gas analyzers KOLION-1B are designed to measure the content in the working area of propane, methanol, formaldehyde.
11	Meter of concrete strength - sclerometer Silver-Schmidt	The company combines the best features Proceq hammer Original-Schmidt with the latest technology, which ultimately led to the creation of a new meter of concrete strength - sclerometer Silver-Schmidt concrete test. Designed to test a wide range of different types of concrete, mortar and stone Ideally suited for measurements on objects Convenient for measurements in tight spaces and confined spaces (for example, when measuring overhead) Especially useful for monitoring lining tunnels, since the measurement results do not depend on the direction of impact Measurement of fresh and soft concrete mushroom-shaped plug (to determine when to remove or dismantling of forms)

Equipment of construction laboratory

No.	Designation of device (equipment)	Purpose of device (equipment)	Photography
Machine-tools and equipment*
1.	Compression testing machine ИП-1А-500-АБ	Is used for static tests of standard concrete samples according to the State Standard 10180-90, prisms samples according to the State Standard 24452-80, bituminous concrete and other construction materials within technical characteristics of the machine
2.	Tensile-testing machine МР-100 (10t.)	Is designed for static tests of standard materials samples according to the State Standard 1497-84 at normal temperature.
3.	Impact machine TM50	The impact machine TM50 is designed for impulse excitation of premises in case of sound insulation measurement. Five hammers of the machine have electromagnetic gear. Due to this fact business ends of the machine are not worn out and do not require regular technical maintenance. High accuracy of impacts frequency is assured by electronic control. The machine is switched on form control desk or by remote control device. Line supply, voltage 200V, or internal battery supply. The set of tools includes rechargeable battery, remote control device and a bag.
4.	Universal steam coffer КПУ-1М (20 100^о)stainless	The curing of concrete samples Universal steam coffer КПУ-1М ( hereinafter " coffer ") is designed for thermal treatment of concrete in case of determination of its compression capacity in accordance with State Standard 22783-77, as well as for steam curing of concrete samples when selecting regimes of thermal treatment with increase in temperature, exposure (hypothermal heating-up) and cooldown and may be used as a box of normal storage.
5.	Humidity chamber КНТ-60 (60 samples 100100100)	Humidity chamber КНТ is designed for storage (curing) of concrete samples under normal conditions (temperature 20±2°С; humidity 95±5%), according to the State Standard 10180-90.
6.	Heating and cooling cabinet КТХ (-50…+60^оС) 12 samples (100100100)	Laboratory thermostats КТХ are designed for research relating to a wide range of temperatures of various materials, tools and devices
7.	Electric laboratory oven SNOL 67/350 (до 350°С) stainless	The electric oven is designed for drying various materials, analytical works in air ambient, metal normalization and tempering, springs, plastic and other materials heat treatment in stationary conditions at the temperature from 50 to 350 °С
8.	Muffle furnace ПМ-12 (under 1250°С) 6,5 liters	Muffle furnace is designed for high-temperature processing of metals, ceramics, agents and other materials. It is used in industrial laboratories
9.	Press ПРГ-1-10 (10kN/1t) (break curvature)	ПРГ table press is designed for creation of visually controlled static testing of construction materials samples
10.	Flow table СМЖ-539М (100 kg/2800 cycles)	Flow table is designed for concrete and mortar mixes consolidation in case of: - determination of rigidness, density and segregability; - production of control samples for testing of concrete under State Standard 10180-78; - tests of cement under State Standard ГОСТ 310.4-81. It is allowed to manufacture concrete products on a flow table of concrete products with total weight under 100 kg (together with form).
11.	ПГР device	ПГР device (STRIYTSNIL cone) is designed for determination of normal consistency of mortar and mortar mix flow in laboratory according to the State Standard 5802-86.
12.	Electronic weigher А&D GF-4000 (4100g/0,01гg)	The accurate and rapid weighting of materials in laboratory conditions.
13.	ИАЦ-04М device (cement activity)	The cement activity indicator is designed for determination of the principal indicator of cement quality i.e. activity. The device provides determination of activity of portland cement, blastfurnace cement, portland cement with mineral supplements supplied by Russian manufacturers.
14.	Device Vika ОГЦ-1	Device Vika ПВ -300 is together with pestle, long needle pin, short needle pin, ring and slabs is designed for determination of normal consistency of cement paste and complies with State Standards 310.3 and EN-196.
15.	Vacuum plant for asphalt-concrete ВУ-976А	Is designed for production of a vacuum of a certain amount in working chamber necessary for testing samples in laboratory conditions according to the State Standard 12801-98 "Materials on the ground of organic binders for road and airfield construction. Testing methods".
16.	Universal lathe SPA-500P	Production of samples for mechanical tests.
17.	Rough grinding machine ВКL-2000	Production of samples for mechanical tests.
18.	Drill rig DD130. HILTI	Selection of samples of construction structural materials for laboratory tests.
19.	Accumulator perforator ТЕ- 6А	Production of samples for mechanical tests.
20.	Cutter DC 230-S-EX	Selection of samples of construction structural materials for laboratory tests.
Nondestructive gauges
21.	Concrete strength detector ОНИКС-ОС	Determination of concrete strength by method of separation with shear fracture and by method of tearing-away of steel disc according to the State Standard 22690 at construction facilities and in case of inspection of buildings, installations and structures. The precision of gaging characteristics of ultrasonic testing and impact impulse devices in accordance with Methodological instruction NIIJB MDC (НИИЖБ МДС) 62-2.01 and State Standard 22690 Tests of samples of geological materials, beams, cubes, adhesion test, anker tear away force (with special tools).
22.	Device ПОС-50МГ4 (separation with shear fracture)	For non-destructive control of concrete strength by method of separation with shear fracture according to the State Standard 22690. Devices applicable scope is determination of concrete strength at construction facilities, in the course of inspection of buildings and installations as well as for precision of gaging characteristics of impact impulse devices in accordance with Application No. 9, State Standard 22690.
23.	Concrete strength indicator ПОС-МГ4	Is designed for non-destructive control over concrete strength by method of separation with shear fracture and method of tearing-away of steel disc according to the State Standard 22690.
24.	Construction materials strength indicator ONIKS-2.53	Operative control over strength and homogeneity of concrete (State Standard 22690) in case of technologic control, facilities inspection as well as brick, light concrete control etc.
25.	Concrete strength indicator ИПС МГ4	The non-destructive control of concrete, concrete products and structures strength by method of impact impulse according to the State Standard 22690-88. The device also permits to assess physical and mathematic properties of materials and products (strength, hardness, flexibility and plasticity), identify non-homogenity, areas of improper consolidation, segregations etc.
26.	Mechanical scleroscope ОМШ-1	Assessment of concrete strength in case of contraction by method of impact resilience in concrete and reinforced concrete structures and products according to the State Standard 22690.1-77, State Standard 22690-88.
27.	Ultrasound test gauge УК1401 (concrete strength)	Determination of concrete strength according to sound speed. Measurement of time and speed of lengthway ultrasound waves dissemination in hard materials in case of surface scanning on fixed base. Assessment of supporting capacity of concrete pillars, poles and electric power lines. Search of subsurface defects in concrete installations. Assessment of void content and fissuring of geological material, anisotropy degree and texture of composite materials.
28.	Ferroscan РС 200 HILTI	Identification of metal reinforcement bars in concrete, accurate image of their location, diameter and depth of occurence
29.	Reinforcement location indicator "BOSCH" DMO 10E	Digital metal detector Bosch DMO 10 E is designed for identification in walls and ceilings of hidden metal objects for example reinforcement bars and network cables. The device distinguishes steel, iron and nonferrous metals and signalizes on the presence of conducting cables, has a function of drill depth indication permitting to adequately determine the drilling zone, accurately determines drilling zones even in presence of steel mats and fittings at depth of 10 sm.
30.	Electronic gauger of concrete cover ИПА-МГ4	Is designed for operative control over thickness of concrete cover and location of reinforcement bars in reinforced concrete products and structures by means of magnetic method according to the State Standard 22904. Applicable scope of device covers control over parameters of reinforcement of reinforced concrete structures and installations at construction enterprises, sites and in case of inspection of operated buildings and installations.
31.	Piles length measurer SPECTR – 2.0	The localization of defects and determination of the length of bored and metal piles as well as acquisition of seismic and spectral profile. May be used as double-channel seismostation.
32.	Georadar ОКО	The georadar is designed for identification of various subjects in soil, under water, in bulked cargo and in other environments, nonhomogenities including pipelines, karst caverns and scours in railway and road bed, soil structural imperfection etc. Georadars may be used in the course of archeological works, construction and repair works, search of criminal and contraband dumping etc.
33.	Litvinov's field laboratory ПЛЛ-9	Research with the use of devices of field laboratory is conducted directly in field, at site or in a laboratory with samples of soil selected by means of tools included in the field laboratory set of instruments. The laboratory permits to determine and perform: selection of samples of soil with natural composition and humidity from prospect holes, trenches and from earth surface for determination of main physical characteristics for compressive and settlement, filtration and other tests soil drying in a drying box compressive tests determination of soil volume density (of natural humidity) volume density of soil skeleton of natural humidity (gravimetric and volume humidity) humidity degree void content and voids ratio density degree of sand soils plasticity of clay (cohesive) soils (plastic limits, liquid limits and plasticity index) granulometric composition of sandy (loose) soils angle of natural slope of sandy soils in dry condition and under water relative subsidence of macroporous soils coefficient of consolidation coefficient of filtration maximum molecular moisture capacity
34.	Universal dynamic density gage ДПУ-1	Is designated for operative control over the quality of subgrade compaction in case of determination of density of backfilling material and other bulk installations.
35.	Balloon densimeter ПБД-КМ	Is designed for control over the quality of compaction of macadam bases and gravel beds and coverings from mixes the granulometric composition of which complies with State Standard 25607-94, as well as for the control over density of subgrade from macrofragmental soils and sand-gravel mixture with fineness under 80 millimeters. May be used for control over density of subgrade from macrofragmental soils and sand-gravel mixture with fineness under 80 millimeters. It is recommended to use densimeter ПБД-КМ in case of control over compaction of road pavement from soils and stone materials reinforced by cement and bitumen in cases where the possibility to select samples by centre marks or slashes is excluded, for example due to reduced strength of stabilized material.
36.	Hydrostatic densimeter СГП-1М	For operative control of soil subgrade compaction and additional layers of groundwork bases, bases of aerodromes and other earth installations. Is accepted for use on any soil containing not more than 15% of solid inclusions sized over 2 millimeters.
37.	Sonoprobe А1212 MASTER LIGHT	Is designed for search and determination of coordinates of various violations of denseness and homogeneity of material in products from metal and plastic in case of the following types of works: welds control search of spots of corrosion, cracks, internal delaminations and other defects Determination of coordinates and assessment of defects parameters such as violations of denseness and homogeneity of material in products from metal and plastic measurement of product thickness
38.	Ultrasound hardness tester МЕТ-УД	Realizes methods of rebound method and ultrasound contact impedance UCI). Is designed for measurement of hardness and of products from metal and composite metals according to Rockwell, Brinell, Vickers, Shore D etc. scales
39.	Ultrasonic thickness tool ТТ100 by "Time Group Inc."	Portable digital ultrasonic thickness tool with microprocessor control is designed for measurement of thickness of various metal and non-metal materials.
40.	Layer thickness meter «Quanix»	Wide applicable scope permits to use it for measurement of thickness of coverings on various metal and non-metal bases. Due to integration of two penetrometers Fe и NFe, the layer thickness meter QuaNix® 1500 may measure non-magnetic layers on steel and iron, aluminum, cooper or stainless steel without calibration. The diapason of measurements is from 0 to 5000 micrometers/ 0-200 mils/ (changes over).
41.	Set for weld seals visual quality control ВИК-1	The set for visual quality control is designed for visual quality control over: - base metal, - preparation of details for welding, - fitting of joint details (assembly units, products) for welding, - weld seals and weld depositions, - manufacturing of details and assembly units, - correction of defects in weld seals and base metal at stages of incoming control of base metal, manufacturing (assembling, repair) of details, assembly units and products in case of technical diagnostics of metal and weld seals state in the course of operation inter alia upon expiration of product design service life.
42.	Adhesion of coatings tester ОНИКС-АП	Measurement of adhesional strength of ceramic tiles, plaster, protective, textured, paint coats by method of normal fracture of steel disks according to the State Standards 28089-89, 28574-90, 27325-87 Measurement of ankers and dished dowel pins, roofing mastics and adhesive bonds cutaway forces (State Standards 26589, 1470, 24064) Assessment of quality of protective covering and finishing works at construction facilities, construction enterprises, in laboratory, furniture, woodworking and painting production in case of inspection, reconstruction of buildings and installations
43.	Transverse coulter Elcometer 107	The device realizes tear test by cross-knurl method.
44.	Fibre-optic endoscope series ЭТГ	Is used for visual control of hard-to-reach places including closed, light-insulated places or places with small inlet ports by way of visual inspection.
45.	Thermovisor HotShot	Prevention of equipment downtime due to exclusion of breakdowns, rapid and proper identification of technical and functional problems in the course of equipment maintenance. Assessment of quality of performed repair and prophylactic works. Identification of sources and assessment of energy losses level Examination of temperature parameters of technologic processes by personnel and search of ways to optimize them. Safe support of hazardous processes. Collection of documentary archives of radiometric thermograms and related data on performed inspections.
46.	Video endoscope Wöhler VIS 340	Industrial video endoscope for inspection of pipelines and large cavities (from 40 mm). The device is equipped with video camera which may revolve about its axis by 360 degrees and has deflection from axis by 90 degrees. Such capacities of the device permit to inspect the most inaccessible parts of sewerage, pipelines, containers. The device has an integrated memory card record unit SD (1 Gb) and electronic cyclometer. Probe spacing:20 m.
47.	Thermovisor ТН7800	Is designed for remote control over temperature of various industrial and energetic facilities. These models are widely used in housing and utilities infrastructure for determination of buildings and installations heat losses. Additional optics permit to perform thermal survey of remote facilities.
48.	Pyroscope ST-60 (-32...600°С)	Radiation thermometer is designed for remote measurement of temperature by noncontact method. It is used in autodiagnostics and electric audit, maintenance of electric, mechanical, ventilation, air conditioning systems, food, automobile and marine industries.
49.	Thermal conductivity meter ИТП-МГ4	Is designed for determination of conductivity and thermal resistance of construction materials as well as materials designated for thermal insulation of industrial equipment and pipelines in stationary regime according to the State Standard ГОСТ 7076 and by method of heat probe according to the State Standard 30256.
50.	Dewpoint indicator DEWMASTER & DEWLOGGER	Simultaneous reflection of three channels: relevant humidity, air temperature and surface temperature. The dewpoint temperature and ∆Т (the difference between dewpoint temperature and surface temperature) are also indicated.
51.	Hygrometer of construction materials, wood, air HYDRO PRO	The hygrometer is designed for measurement of temperature and humidity of air in premises, wood humidity control according to the State Standard 16588 and construction materials according to the State Standard 21718. The hygrometer provides possibility of control over current temperature and humidity of air, measurement of construction materials (concrete, overlay, plaster, brick) and wood humidity.
52.	Hygrometer of construction materials ВИМС-2.22	The device is designed for operative control over humidity of construction materials inter alia in products, structures, installations (State Standard 21718), wood (State Standard 16588) and other materials. Hygrometer's applicable scope: Solid materials: concrete, brick, strainers, floors, plaster, abrasives, asbestos-sheeting, wood and its derivative, compositional materials etc. Discrete and fibrous materials: sand, soil, chips, screening, bottom ash, ashes, abrasive mixtures, argil, thermal insulation, textile fabric etc.
53.	Electronic hydrometer "VLAGOMER-МГ4Б"	Microprocessor device Vlagomer-МГ4Б is designed for operative control over wood humidity according to the State Standard 16588 and large selection of construction materials inter alia in products, structures and installations according to the State Standard 21718
54.	Electronic hydrometer "VLAGOMER -МГ4Д"	Is designed for operative control over discrete construction materials humidity according to the State Standard 21718 in laboratories, industrial and natural conditions
55.	Electronic wood hygrometer ЭВ-2К	For approximate operative determination of humidity of carving wood, blank parts, details and products from rough pine, fir, birch, beech and oak growing in European zone. Measurement depth amounts to 1 sm.00
56.	Thermoanemometer TESTO	Measurement of speed and temperature of air flow in premises and afield.
57.	Vibration survey device VIBROTEST-МГ4+	Device Vibrotest-МГ4+ is designed for control over and detection of vibration speed, vibrational acceleration, azimuth and frequency of sinusoidal oscillations of vibration installations used for compaction of concrete mixtures in the course of reinforced concrete products manufacturing as well as for measurement of vibration parameters of other facilities.
58.	Air flow speed meter ИСП-МГ4	Anemometer - thermometer ИСП-МГ4 and ИСП-МГ4.01 are designed for measurement of average speed of directed air flows and their temperature in ventilation systems (air pipes, channels, dusts) of industrial and civic buildings as well as for measurement of average speed of wind and ambient air temperature.
59.	Noise meter "OKTAVA" 110 А	Noise meter OKTAVA 101АМ is designed for precise measurement of sound and infrasound during sanitary and hygienic assessment. Is used for certification of machines, study of materials sound absorption properties, measurement of room acoustics etc.
60.	Anemometer АСО-3	Anemometer АСО-3 is designed for measurement of average speed of directed air flow in industrial conditions.
61.	Luxometer TESTO-545	For measurement of illuminance at work places, in hospitals, offices and schools.
62.	Differential manometer	Professional devices for measurement of pressure, gas rarefaction and pressure difference as well as for determination of speed and discharge of gas and dust and air flows with the use of pressure tubes "NIIOGAS" or "PITO" (according to the State Standards 17.2.4.06-90 and 8.361-79). It is applied in case of technologic and ecologic control over ventilation of industrial premises, aerodynamic research.
63.	Device Low E Coating Detektor Bohle	Detector for determination of covering LOW-E on the glass
64.	Device Merlin TGi Bohle	Glass hardness determination.
65.	ВО 51 646 10 Bohle	Detector for determination of the pane side contacting with tin during float process.
66.	Detector for determination of the pane side contacting with tin during float process.	Glass analyzer Merlin Laser measures from one side the thickness of pane as well as space between panes quickly and easily without disassembling of window unit.
67.	Device Optischer Glasdickenmesser Bohle	Measurement of glass units thickness
68.	Cracks and joints measurer	Cracks and joints measurers are used for monitoring of surface cracks and joints in concrete structures and hard-rocks. The set of devices includes transducer corpus and target equipped by screw ankers. As a rule ankers are attached to the opposite sides of joint (crack). Shifting converter assembled in transducer corpus is inserted across joint or crack permitting to measure change in distance between ankers. It is possible to joint several ankers in the system CRID which includes four small cracks measurers connected with pilot cable to small battery-powered detector for automatic collection of data on non-coplanar shifting.
69.	Road lath with electronic level RDU-Condor-EL (РДУ-Кондор-ЭЛ) (3 m)	Measurements of irregularities covering surface and bases if automobile roads and aerodromes according to the State Standard 30412-96. Determination of back and cross slopes of crossing part of the road and aerodrome coverings in accordance with requirement of the Construction Standards and Regulations 2.05.02-85; 32-03-96; 2.05.11-83. Determination of leaner parameters of roads structural elements, thickness of subgrade. Determination of slope, embankment and excavation grade in the course of construction, repair and acceptance for operation of automobile roads and aerodromes.
70.	Electronic level
71.	Laser level with electronic graphometer Nedo LaserWinkeltronic-1	Nedo LaserWinkeltronic-1 is an electronic graphometer i.e. level permitting to measure angles with high accuracy and to transfer marks by integrated laser
72.	Multi-prism laser level, mark 3D PRO CONDTROL	High-accuracy laser level 3D Pro CONDTROL is equipped with six irradiators which permit to construct two horizontal planes (with scanning angle 270°), three vertical planes and point down.
73.	Ranging lase (measuring reel) LEICA DISTO A3
74.	Electronic beam compass	Is designed for external and internal measurements as well as for measurement of depths and ledges.
75.	Digital micrometer (electric) 025-050mm (0.001mm) solid carbide "GRIFF" (480-510)
76.	Test block МТР-1	Test block МТР-1 is used for verification of hardness testers measuring metal hardness with Rockwell method.
77.	Test block МТБ-1	Test block МТБ-1 is used for verification of devices for measurement of metal hardness with Brinell method.
78.	Test block МТБ-3	Model test block of 2^nd class according to State Standard 9031-75 is used for verification of hardness testers measuring metal hardness with Brinell, Vickers, Rockwell and super-Rockwell method.
79.	Standard square УШ (250х160 мм)	Is designed for control of mutually perpendicular location of details and for verification of machine-tool accuracy.
80.	Microscope МИР-3	Is designed for observation of small items or separate details, measurement of distance between separate details as well as for measurement of mall items of linear dimensions.
81.	Binocular NIKON Action 7x50 CF EX WP
82.	Photo cameras Canon PowerShot
83.	Portable radio Motorola T5622
Engineering and geodetic devices
84.	Electric tachymeter Sokkia SET 530RK	Electric tachymeters of series 30RK are elaborated for resolution of wide range of tasks in construction, land survey, topography and surveys, observation of deformations, construction of high-accuracy networks, assembling of technologic equipment etc.
85.	Satellite geodetic equipment Topcon GB-1000	Topcon GB-1000 is designed for performance of almost all types of geodetic works with use of Global Navigation Satellite System GLONASS and GPS. The application of satellite technologies significantly reduces terms and elevates efficiency of works.
86.	Digital level TRIMBLE DINI 07	Is designed for work at any facilities where rapid and accurate heights measurement is necessary. It is used for resolution of such tasks as accurate leveling of flat and angled surfaces and grade profiles, survey over deformations and height control over geodetic control networks.
87.	Laser level Triax MP40	Accurate rotary laser level with electronic potentiometer and visible laser ray for automatic construction of horizontal and vertical planes. Is efficiently used for internal and external construction works.
Equipment of electric measurement laboratory
88.	Small portable set for testing automatic alternate circuit breakers with regulator РТ-2048М, № 467	Is designed for primary injection test of magnetic, thermal and semiconducting breakers of automatic alternate circuit breakers in power networks under 1000 V
89.	Small portable set for testing automatic alternate circuit breakers with regulator РТ-2048, № 607
90.	Earth-resistance meter М-416	For measurement of grounding devices resistance, active resistances, may be used for soil resistivity measurement
91.	Microhmmeter Ф4104-М1	Is designed for measurement of direct current resistance. Microhmmeter Ф4104 measurement limit is from 0-100 micron to 0-10 megohm (12 diapasons).
92.	Tester of residual current circuit-breakers and grounding devices МRР-200	Contact voltage meter and tester of residual current circuit-breakers MRP-200 is a portable digital device for measurement of residual current devices parameters functioning at differential current of short circuit as well as parameters of electric installations protected by them. Additionally the device provides possibility to measure voltage of alternate current.
93.	Device “Vector”	Is designed for testing buildings wirework, in case of selection of nominal of installed automatic circuit breakers as well as during repair, preventive and other works at alive electric installations.
94.	Ц4342-М1	Is designed for measurement of direct current intensity and voltage, mean effective value of intensity and voltage of alternate current of sinusoidal form, direct current resistance, absolute signal level relating to direct current voltage as well as measurement of bipolar transistor with power under 150 mW.
95.	Electric measurement digital pliers К4570/1Ц	Is a clamp-on meter, also designed for measurement of voltage in direct-current networks under 1000V and alternate current with frequency 50 or 60 Hz and nominal voltage under 750V, inspection of insulation and resistance, diodes, contacts (audible beep-beep), temperature counting (К4570/2Ц).
96.	Aneroid barometer БАММ-1	Is designed for measurement of atmospheric pressure under surface condition at the temperature from 0 to 40°С and relative humidity 80%.
97.	Mercury thermometer, ТЛ-2м	Is designed for measurement of temperature from -30 to +350 °С
98.	Psychrometric hygrometer ВИТ-2	Is designed for measurement of relative humidity from 20 to 90% and air temperature from 15 to 40°С in premises.
99.	Megohmmeter, ЭС0202/2-Г	Is designed for measurement of resistance of alive circuit insulation.
100.	Dynamometer ДПУ-1-2 5031	Is designed for measurement of stretching stresses in laboratory premises at the ambience temperature from 10°С to + 45°С and relative humidity under 80% ... Measurement of stress is exercised in kilonewtons (кН).

Special equipment

101.	Excavator-loader Volvo BL61
102.	Mobile electric laboratory on chassis Volkswagen transporter
103.	Automobile LADA 212140
104.	Automobile Citroen Berlingo (1)
105.	Automobile Citroen Berlingo (2)
106.	Automobile Nissan Qashqai
107.	Automobile ГАЗ-330232
108.	Automobile 27961B/ГАЗ - 3302
109.	Mobile compressor station (МЗА9-ПВ6/0,7 (ЗИФ-ПВ6/0,7 on chassis)
110.	Trailer wagon (residential, mobile)
111.	Gasoline electrical units (generator) KGE 7000Тс
112.	Mobile substation КТП-ПК-К-400/10/0,4-У1
113.	Asphalt cutting device DT 2
114.	Mixing batch М 150Е
115.	Electric transmission saw UC3003A
116.	Vibrating board ВР1845-2
117.	Chisel hammer BOSCH GSH 11 E
118.	Jackhammer drill (perforator) Makita HR3000C
119.	Front polishing machine Makita 9059S
120.	Angle drive grinder Makita 9558NB
121.	Jackhammer drill Makita HR2450F/FT
122.	Welder ТМГ500
123.	Rectifier charger BOOSTER 400E 230 V